DETAILS

ALUMINIUM LAMELLAS WITH FILLING 55-56-77

These products are made by bending aluminumsheets by Roll-Forming method and giving the required shape.

● Lamellas formed in acertain shape are filled with polyurethane foam.

● Aluminum lamellasutilized in shutters may vary according to the surface covered, nominalthickness, foam density and the winding diameter.

● Polyurethane inside theproduct provides significant advantages as regards heat and sound insulation.

STEEL LAMELLAS WITH FILLING 55-56-77

These products are made by bending steel sheetsby Roll-Forming method and giving the required shape.

● Lamellas formed in acertain shape are filled with polyurethane foam.

● Steel lamellas utilizedin shutters may vary according to the surface covered, nominal thickness, foamdensity and the winding diameter.

● Polyurethane inside theproduct provides significant advantages as regards heat and sound insulation.

EXTRUDED ALUMINUM LAMELLAS 62-63-77

Extruded aluminum lamellas are preferred inplaces where high security is required.

Lamellas produced by extrusion method arehollow but have more wall thickness.

● Lamellas produced byextrusion method are suitable for usage of lamellas with window transmittinglight.

Eye lamellas allow the products to be exhibitedin the showcase during the nights.

ALUMINUM U’s WITH SIDE POSTS

● There are U’s with orwithout post in three different sizes.

● U’s without post can beutilized for house type blinds depending on the architectural details.

● There are specialchannels in two side walls of U’s with post enabling passage of thin cords.

● Thin cords attached tothese channels reduce friction of lamellas with the post.

SECURITY ENHANCING HANGER LOCK SYSTEM

Separate designs have been made for 40mm and 60mm drums.

● Risk of opening the doors by force from thebottom is eliminated by using original hanger locks.

CYLINDER ENGINE

It is thin and long so that it can be mounted in the pipes where thelamellas are rolled.

● Cylinder engine isthermally protected against overheating due to the heavy work load.

It provides greatadvantages interms of ease of installation and service.

● Works silently.

Feeding voltage is 220V/50 Hz and is singlephased.

● Does not requiremaintenance and lubrication during its lifetime.

The product can be used in pipe diameters of40mm/60mm/70mm.

● 5 year guarantee.

● The product has DIN,ISO9001,EN29001 and CE certificates.

GEARMOTOR

It is thin and long so that it can be mountedin the pipes where the lamellas are rolled.

● It has manual on/offfunction with the help of special lever in cases of power failure.

● It provides great advantages interms of ease ofinstallation and service.

● Works silently.

Feeding voltage is 220V/50 Hz and is single phased.

● The product does not require maintenance andlubrication during its lifetime.

● Can be used in pipe diameters of 60mm/70mm.

● 5 years guarantee.

● The product has DIN, ISO9001,EN29001 and CEcertificates.

RECEIVER-CONTROL, BUTTON, SWITCHWITH KEY

● Storrol remote controls have 4 channels.

● The product can move four engines simultaneously.

Remote controls designed as keychain are easy to carry.

● Storrol receivers are very small in size (32 *104 * 27mm) and very practical for making connections.

● Storrol receivers have the capability controlling10 A current .

Control distance is 30 m.

● Storrol receiver is capable of being introduced42 different controllers.

The product has three types of buttons.

● The product has different options such aspermanent, spring and keyed options.

● The shutter works only by key by virtue of thekey switch allowing controlled access passage.

UNINTERRUPTED POWER SUPPLY UPS

This is a product specially designed to operate blinds and shuttersengines.

● There are two power options as 750W and 1500W.

● The input and output voltage is200 V and thefrequency is 50 Hz.

The product’s maximum stand-by period of 100 hours during power outageis the most important feature thereof.

● Maintenance Free 2 batteries 12V/7 AH with 5years lifetime are used.

● Charging time is 12 hours.

Standby time is 4 days for 750 W(100 h) and 8 days for 1500 W (200 H) .

● Audible warning is made when switching to useUPS.

● Dimensions (WxHxD) 750 W =335 x190 x 120 mm,1500=W335 x 265 x 120 mm. Net product weight is 750 W= 160 kg and1500 W=400 kg.

● Lifting capacity is 750 W= 12 kg and 1500 W=21kg.  

● It provides great advantages interms of ease ofinstallation and service.

● 5 years guarantee.


Technical Drawing